Nitrogen-doped titanium dioxide/schwertmannite nanocomposites as heterogeneous photo-Fenton catalysts with enhanced efficiency for the degradation of bisphenol A.

Potential health risks related to environmental endocrine disruptors (EEDs) have aroused research hotspots at the forefront of water treatment technologies. Herein, nitrogen-doped titanium dioxide/schwertmannite nanocomposites (N-TiO2/SCH) have been successfully developed as heterogeneous catalysts for the degradation of typical EEDs via photo-Fenton processes. Due to the sustainable Fe(III)/Fe(II) conversion induced by photoelectrons, as-prepared N-TiO2/SCH nanocomposites exhibit much enhanced efficiency for the degradation of bisphenol A (BPA; ca. 100% within 60 min under visible irradiation) in a wide pH range of 3.0-7.8, which is significantly higher than that of the pristine schwertmannite (ca. 74.5%) or N-TiO2 (ca. 10.8%). In this photo-Fenton system, the efficient degradation of BPA is mainly attributed to the oxidation by hydroxyl radical (•OH) and singlet oxygen (1O2). Moreover, the possible catalytic mechanisms and reaction pathway of BPA degradation are systematically investigated based on analytical and photoelectrochemical analyses. This work not only provides a feasible means for the development of novel heterogeneous photo-Fenton catalysts, but also lays a theoretical foundation for the potential application of mineral-based materials in wastewater treatment.

Simulated sunlight/periodate-triggered formation of toxic halogenated bisphenols in highly saline water.

Periodate (PI)-based oxidation using the activators, such as metal ions and light irradiation, has emerged as a feasible treatment strategy for the effective remediation of contaminated water and wastewater. Given the pervasive nature of PI residues and solar exposure during application, the role of solar light in remediating the challenging highly saline water matrices needs to be elucidated. In this study, bisphenol A (BPA) was selected as the targeted micropollutant, which can be efficiently eliminated by the simulated sunlight (SSL)/PI system in the presence of high-level Cl- (up to 846.0 mM) at pH 7.0. The presence of different background constituents of water, such as halides, nitrate, and dissolved organic matter, had no effect, or even accelerated BPA abatement. Particularly, the ubiquitous Br- or I- appreciably enhanced the BPA transformation efficiency, which may be ascribed to the generation of high-selective reactive HOBr or HOI. The in silico predictions suggested that the transformation products generated by halide-mediated SSL/PI systems via halogen substitutions showed greater persistence, bioaccumulation, and aquatic toxicity than BPA itself. These findings highlighted a widespread phenomenon during PI-based oxidative treatment of highly saline water, which needs special attention under solar light illumination.

A novel pencil graphite electrode modified with an iron-based conductive metal-organic framework exhibited good ability in simultaneous sensing bisphenol A and bisphenol S.

Bisphenol A (BPA) and its substitute bisphenol S (BPS) are desirable materials widely used in manufacturing plastic products but can pose carcinogenic risks to humans. A new conductive iron-based metal-organic framework (Fe-HHTP)-modified pencil graphite electrode (PGE) for electrochemically sensing BPA and BPS was prepared and fully characterized by SEM, TEM, FT-IR, XRD, and XPS. Results showed that the optimal conditions for preparing Fe-HHTP/PGE were a pH of 6.5, a Fe-HHTP concentration of 2 mg·mL-1, a deposition potential of 0 V, and a deposition time of 100 s. The Fe-HHTP/PGE prepared under such conditions harbored a significant electrocatalytic activity with a detection limit of 0.8 nM for BPA and 1.7 nM for BPS (S/N = 3). Correspondingly, the electrochemical response current was linearly correlated to BPA and BPS, ranging from 0.01 to 100 µM. Fe-HHTP/PGE also obtained satisfactory recoveries by 93.8-102.1% and 96.0-101.3% for detecting BPA and BPS in plastic food packaging samples. Our work has provided a novel electrochemical tool to simultaneously detect BPA and BPS in food packaging samples and environmental matrixes.

Structural insight into the mechanisms and interacting features of endocrine disruptor Bisphenol A and its analogs with human estrogen-related receptor gamma.

Bisphenol A (BPA) is a very important chemical from the commercial perspective. Many useful products are made from it, so its production is increasing day by day. It is widely known that Bisphenol A (BPA) and its analogs are present in the environment and that they enter our body through various routes on a daily basis as we use things made of this chemical in our daily lives. BPA has already been reported to be an endocrine disruptor. Studies have shown that BPA binds strongly to the human estrogen-related receptor gamma (ERRγ) and is an important target of it. This study seeks to understand how it interacts with ERRγ. Molecular docking of BPA and its analogs with ERRγ was performed, and estradiol was taken as a reference. Then, physico-chemical and toxicological analysis of BPA compounds was performed. Subsequently, the dynamic behavior of ERRγ and ERRγ-BPA compound complexes was studied by molecular dynamics simulations over 500 ns, and using this simulated data, their binding energies were again calculated using the MM-PBSA method. We observed that the binding affinity of BPA and its analogs was much higher than that of estradiol, and apart from being toxic, they can be easily absorbed in our body as their physicochemical properties are similar to those of oral medicines. Therefore, this study facilitates the understanding of the structure-activity relationship of ERRγ and BPA compounds and provides information about the key amino acid residues of ERRγ that interact with BPA compounds, which can be helpful to design competitive inhibitors so that we can interrupt the interaction of BPA with ERRγ. In addition, it provides information on BPA and its analogs and will also be helpful in developing new therapeutics.

Surface-surface contacted direct Z-scheme TiO2-BiVO4-PI heterostructure for enhanced photoelectrocatalytic degradation of bisphenols under solar driven.

Bisphenols (BPs) are a series of widely used endocrine disruptors, which potentially harm the environment and human health. In this work, a novel Z-scheme TiO2-BiVO4-PI heterostructure was synthesized, characterized, and used for the simulated sunlight-driven photoelectrocatalytic degradation of BPs. Due to the existence of surface-surface contacted direct Z-scheme between BiVO4 and PI, holes were concentrated on the valence band of BiVO4 and electrons were concentrated on the conduction band of PI, resulting in a stronger redox activity. All six BPs exhibited appreciable degradation following the order of bisphenol A (BPA, 93.5%) > bisphenol B (BPB, 92.7%) > bisphenol AP (BPAP, 85.6%) > bisphenol F (BPF, 75.9%) > bisphenol AF (BPAF, 69.8%) > bisphenol S (BPS, 39.2%), within 120 min under the optimal condition. In the process of degradation, superoxide radicals (·O2-) and hydroxyl radicals (·OH) played dominant roles, and the intermediates of BPs degradation were mainly formed via the substituent shedding or C-C bond breaking of phenol ring, hydroxylation, and ring opening of phenol ring. The ECOSAR program was used to analyze the changes in the toxicity of the intermediates, and it was proved that the toxicity showed a decrease trend during the degradation process. This study provides a Z-scheme mechanism for TiO2-BiVO4-PI, which can degrade BPs and reduce their toxicity effectively.

Tungsten-based nanocatalysts with different structures for visible light responsive photocatalytic degradation of bisphenol A.

Environmental pollution, such as water contamination, is a critical issue that must be absolutely addressed. Here, three different morphologies of tungsten-based photocatalysts (WO3 nanorods, WO3/WS2 nanobricks, WO3/WS2 nanorods) are made using a simple hydrothermal method by changing the solvents (H2O, DMF, aqueous HCl solution). The as-prepared nanocatalysts have excellent thermal stability, large porosity, and high hydrophilicity. The results show all materials have good photocatalytic activity in aqueous media, with WO3/WS2 nanorods (NRs) having the best activity in the photodegradation of bisphenol A (BPA) under visible-light irradiation. This may originate from increased migration of charge carriers and effective prevention of electron‒hole recombination in WO3/WS2 NRs, whereby this photocatalyst is able to generate more reactive •OH and •O2- species, leading to greater photocatalytic activity. About 99.6% of BPA is photodegraded within 60 min when using 1.5 g/L WO3/WS2 NRs and 5.0 mg/L BPA at pH 7.0. Additionally, the optimal conditions (pH, catalyst dosage, initial BPA concentration) for WO3/WS2 NRs are also elaborately investigated. These rod-like heterostructures are expressed as potential catalysts with excellent photostability, efficient reusability, and highly active effectivity in different types of water. In particular, the removal efficiency of BPA by WO3/WS2 NRs reduces by only 1.5% after five recycling runs and even reaches 89.1% in contaminated lake water. This study provides promising insights for the nearly complete removal of BPA from wastewater or different water resources, which is advantageous to various applications in environmental remediation.

Enhanced inhibition of human and rat aromatase activity by benzene ring substitutions in bisphenol A: QSAR structure-activity relationship and in silico docking analysis.

Bisphenol A (BPA) is a widely used plastic material, but its potential endocrine disrupting effect has restricted its use. The BPA alternatives have raised concerns. This study aimed to compare inhibitory potencies of 11 BPA analogues on human and rat placental aromatase (CYP19A1). The inhibitory potency on human CYP19A1 ranged from bisphenol H (IC50, 0.93 µM) to tetramethyl BPA and tetrabromobisphenol S (ineffective at 100 µM) when compared to BPA (IC50, 73.48 µM). Most of them were mixed/competitive inhibitors and inhibited estradiol production in human BeWo cells. Molecular docking analysis showed all BPA analogues bind to steroid active site or in between steroid and heme of CYP19A1 and form a hydrogen bond with catalytic residue Met374. Pharmacophore analysis showed that there were 4 hydrophobic regions for BPA analogues, with bisphenol H occupying 4 regions. Bivariate correlation analysis showed that LogP (lipophilicity) and LogS (water solubility) of BPA analogues were correlated with their IC50 values. Computerized drug metabolism and pharmacokinetics analysis showed that bisphenol H, tetrabromobisphenol A, and tetrachlorobisphenol A had low solubility, which might explain their weaker inhibition on estradiol production on BeWo cells. In conclusion, BPA analogues mostly can inhibit CYP19A1 and the lipophilicity determines their inhibitory strength.

Melatonin and Vitamins as Protectors against the Reproductive Toxicity of Bisphenols: Which Is the Most Effective? A Systematic Review and Meta-Analysis.

Bisphenols such as bisphenol A (BPA), S (BPS), C (BPC), F (BPF), AF (BPAF), tetrabromobisphenol, nonylphenol, and octylphenol are plasticizers used worldwide to manufacture daily-use articles. Exposure to these compounds is related to many pathologies of public health importance, such as infertility. Using a protector compound against the reproductive toxicological effects of bisphenols is of scientific interest. Melatonin and vitamins have been tested, but the results are not conclusive. To this end, this systematic review and meta-analysis compared the response of reproductive variables to melatonin and vitamin administration as protectors against damage caused by bisphenols. We search for controlled studies of male rats exposed to bisphenols to induce alterations in reproduction, with at least one intervention group receiving melatonin or vitamins (B, C, or E). Also, molecular docking simulations were performed between the androgen (AR) and estrogen receptors (ER), melatonin, and vitamins. About 1234 records were initially found; finally, 13 studies were qualified for review and meta-analysis. Melatonin plus bisphenol improves sperm concentration and viability of sperm and increases testosterone serum levels compared with control groups; however, groups receiving vitamins plus bisphenols had lower sperm concentration, total testis weight, and testosterone serum levels than the control. In the docking analysis, vitamin E had the highest negative MolDock score, representing the best binding affinity with AR and ER, compared with other vitamins and melatonin in the docking. Our findings suggest that vitamins could act as an endocrine disruptor, and melatonin is most effective in protecting against the toxic effects of bisphenols.

Hormone effects of eighteen bisphenol analogues and their effects on cellular homeostasis and the typical signal pathways.

Through the transfer chain of surroundings from feed to the farmed-animals and ultimately the corresponding livestock and poultry products, people are exposed to large amounts of bisphenol analogues (BPs), such as rational emissions from manufacturing plants, feed packaging bags and food packaging contact. Some BPs have been reported to show certain toxicological effects, especially, estrogen and endocrine disrupting effect. With the increasing application of BPs, the problem is becoming more and more serious. We systematically studied the hormonal effects of 18 BPs and their effects on cell homeostasis and classical signaling pathways by using classical E-SCREEN assay, fluorescent probes and western blotting. The results confirmed the estrogen-like effect of 13 BPs and 6 BPs obtained high docking scores (Scores < -9.0) for the three receptors simultaneously with the main interactions of hydrophobic, hydrogen and π-stacking of T-type bonds. BPAP regulates cells via apoptosis and steroid signaling pathway by intracellular ROS and mitochondrial followed the caspase pathway. BPE and BPS were involved in the classical NF-κB and Hippo signaling pathways. All data provides scientific basis for the safety risk assessment of endocrine disrupting and cellular homeostasis evaluation of BPs as chronic environmental pollution.

Congener-specific uptake and accumulation of bisphenols in edible plants: Binding to prediction of bioaccumulation by attention mechanism multi-layer perceptron machine learning model.

Plant accumulation of phenolic contaminants from agricultural soils can cause human health risks via the food chain. However, experimental and predictive information for plant uptake and accumulation of bisphenol congeners is lacking. In this study, the uptake, translocation, and accumulation of five bisphenols (BPs) in carrot and lettuce plants were investigated through hydroponic culture (duration of 168 h) and soil culture (duration of 42 days) systems. The results suggested a higher bioconcentration factor (BCF) of bisphenol AF (BPAF) in plants than that of the other four BPs. A positive correlation was found between the log BCF and the log Kow of BPs (R2carrot = 0.987, R2lettuce = 0.801, P < 0.05), while the log (translocation factor) exhibited a negative correlation with the log Kow (R2carrot = 0.957, R2lettuce = 0.960, P < 0.05). The results of molecular docking revealed that the lower binding energy of BPAF with glycosyltransferase, glutathione S-transferase, and cytochrome P450 (-4.34, -4.05, and -3.52 kcal/mol) would be responsible for its higher accumulation in plants. Based on the experimental data, an attention mechanism multi-layer perceptron (AM-MLP) model was developed to predict the BCF of eight untested BPs by machine learning, suggesting the relatively high BCF of bisphenol BP, bisphenol PH, and bisphenol TMC (BCFcarrot = 1.37, 1.50, 1.03; BCFlettuce = 1.02, 0.98, 0.67). The prediction of BCF for ever-increasing varieties of BPs by machine learning would reduce repetitive experimental tests and save resources, providing scientific guidance for the production and application of BPs from the perspective of priority pollutants.

Effective immobilization of bisphenol A utilizing activated biochar incorporated into soil: combined with batch adsorption and fixed-bed column studies.

This study presented the mixture of biochar and soil for removal of bisphenol A (BPA) to assess environmental remediation ability. Using phoenix tree leaves as biomass and phosphoric acid as activator, after one-step hydrothermal and short-term activation, the eventual solid product was phosphoric acid hydrothermal activated carbon (HPC). The characterizations showed that HPC had the high specific surface (994.21 m2·g-1), and large unsaturated esters and hydroxyl groups. The saturated adsorption capacities of batch and column adsorption for the addition of 0.5% HPC to soil were 0.790 mg·g-1 and 67.23 mg·kg-1, while to the natural soil were 0.236 mg·g-1 and 8.75 mg·kg-1, respectively. The adsorption kinetics and thermodynamic analysis indicated that the adsorption process utilizing HPC incorporated into soil was a chemical reaction rate-controlled, physical-dominated multilayer adsorption, and spontaneous endothermic. Also, batch adsorption experiments and analysis were performed under different pH levels, HPC contents, organic acid concentrations, and cationic strengths. Successively, fixed-bed column experiments were carried out with and without the HPC; the results showed that the wide mass transfer zone led to the effective fixation of BPA, and the organic acid had no obvious effect on the fixation of BPA when the 1.0% HPC mixed with soil. Finally, through characterizations and data analysis, the enhanced adsorption of BPA by HPC mixed with soil mainly relied on π-π interaction, hydrogen bonding, followed by electrostatic attraction and pore filling.

Bisphenols and perfluoroalkyls alter human stem cells integrity: A possible link with infertility.

Bisphenols and Perfluoroalkyls are chemical compounds widely used in industry known to be endocrine disruptors (EDs). Once ingested through contaminated aliments, they mimic the activity of endogenous hormones leading to a broad spectrum of diseases. Due to the extensive use of plastic in human life, particular attention should be paid to antenatal exposure to Bisphenols and Perfluoroalkyls since they cross the placental barrier and accumulates in developing embryo. Here we investigated the effects of Bisphenol-A (BPA), Bisphenol-S (BPS), perfluorooctane-sulfonate (PFOS) and perfluorooctanoic-acid (PFOA), alone or combined, on human-induced pluripotent stem cells (hiPSCs) that share several biological features with the stem cells of blastocysts. Our data show that these EDs affect hiPSC inducing a great mitotoxicity and dramatic changes in genes involved in the maintenance of pluripotency, germline specification, and epigenetic regulation. We also evidenced that these chemicals, when combined, may have additive, synergistic but also negative effects. All these data suggest that antenatal exposure to these EDs may affect the integrity of stem cells in the developing embryos, interfering with critical stages of early human development that might be determinant for fertility. The observation that the effects of exposure to a combination of these chemicals are not easily foreseeable further highlights the need for wider awareness of the complexity of the EDs effects on human health and of the social and economic burden attributable to these compounds.

Exolaccase Propels Humification to Decontaminate Bisphenol A and Create Humic-like Biostimulants.

Exolaccase-propelled humification (E-PH) helps eliminate phenolic pollutants and produce macromolecular precipitates. Herein, we investigated the influencing mechanism of 12 humic precursors (HPs) on exolaccase-enabled bisphenol A (BPA) decontamination and humification. Catechol, vanillic acid, caffeic acid, and gentian acid not only expedited BPA removal but also created large amounts of copolymeric precipitates. These precipitates had rich functional groups similar to natural humic substances, which presented great aromatic and acidic characteristics. The releasing amounts of BPA monomer from four precipitates were 0.08-12.87% at pH 2.0-11.0, suggesting that BPA-HP copolymers had pH stability. More excitingly, certain copolymeric precipitates could stimulate the growth and development of radish seedlings. The radish growth-promotion mechanisms of copolymers were involved in two aspects: (1) Copolymers interacted with root exudates to accelerate nutrient uptake; (2) Copolymers released auxins to provoke radish growth. These results may provide an innovative strategy for decontaminating phenolic pollutants and yielding humic-like biostimulants in E-PH.

Twelve natural estrogens and ten bisphenol analogues in eight drinking water treatment plants: Analytical method, their occurrence and risk evaluation.

Bisphenol analogues (BPs) and natural estrogens (NEs) as two important groups of endocrine-disrupting compounds (EDCs) in drinking water treatment plants (DWTPs) have been hardly investigated except bisphenol A (BPA) and three major NEs including estrone (E1), 17ß-estradiol (E2) and estriol (E3). In this study, a GC-MS analytical method was firstly established and validated for trace simultaneous determination of ten BPs and twelve NEs in drinking water, which included BPA, bisphenol B (BPB), bisphenol C (BPC), bisphenol E (BPE), bsiphenol F (BPF), bsiphenol P (BPP), bisphenol S (BPS), bisphenol Z (BPZ), bisphenol AF (BPAF), bisphenol AP (BPAP), E1, E2, E3, 17α-estradiol (17α-E2), 2-hydroestrone (2OHE1), 16hydroxyestrone (16α-OHE1), 4-hydroestrone (4OHE1), 2-hydroxyesstradiol (2OHE2), 4-hydroxyestradiol (4OHE2), 17-epiestriol (17epiE3), 16-epiestriol (16epiE3) and 16keto-estraiol (16ketoE2). This investigation showed that eighteen out of twenty-two targeted compounds were detected in drinking source waters of eight DWTPs with concentrations ranging from not detected to 142.8 ng/L. Although the conventional treatment process of DWTP could efficiently remove both BPs and NEs with respective removal efficiencies of 74.1%-90.9% and 74.5%-100%, BPA, BPS, BPE, BPZ, E1, 2OHE1, and 2OHE2 were found in the finished drinking waters. Chlorination could remove part of BPs and NEs, but the efficiency varied greatly with DWTP and the reason was unknown. In the finished drinking waters of eight DWTPs, the highest chemically calculated estrogen equivalence (EEQ) derived from BPs and NEs was up to 6.11 ngE2/L, which was over 22 times that could do harm to zebrafish, indicating a potential risk to human health. Given the fact that many chlorination products of BPs and NEs likely have higher estrogenic activities, the estrogenic effect of BPs and NEs in finished drinking water should be accurately examined urgently with the inclusion of BPs, NEs as well as their main chlorinated by-products. This study shed new light on the occurrence, removal, and potential estrogenic effects of BPs and NEs in DWTPs.

Bisphenol A release from commercially available 3-dimensionally printed resins and human cell apoptosis to bisphenol A: an in-vitro study.

Bisphenol A (BPA) from dental materials may be linked to children's health issues. This study aimed to assess the release of BPA from commercially available 3-dimensional (3D)-printed resin materials and evaluate BPA-related apoptotic effects on human periodontal ligament cells and gingival fibroblasts. Commercially available 3D-printed resin materials for prosthodontic use were selected as follows: NextDent C&B MFH (3D Systems, Rock Hill, SC, USA), DIOnavi-P. MAX (Dio Co., Busan, Korea), and DIOnavi-Denture02 (Dio Co., Busan, Korea). Identical cuboidal samples (1 cm × 1 cm × 0.5 cm) were printed from the materials and cured. BPA release was assessed using liquid chromatography/mass spectrometry (LC/MS). In addition, human gingival fibroblasts and periodontal ligament cells were exposed to various BPA solutions based on the LC/MS results. Cell Counting kit-8 (CCK-8) and real-time polymerase chain reaction analyses were performed to evaluate BPA-related apoptotic effects. The LC/MS analysis confirmed that none of the 3D-printed resin materials released BPA after curing. Both human gingival fibroblasts and periodontal ligament cells showed lower viability after BPA exposure. Regarding apoptosis-related gene expression, Caspase10 (CASP10) expression in periodontal ligament cells was significantly different in the BPA solutions (p < 0.05). The expression of BAX and Capspase8 (CASP8) in gingival fibroblasts was significantly increased by BPA in a dose-dependent manner (p < 0.05). Within the limitations of this study, the 3D-printed resin materials were not found to release BPA. This finding implies that 3D-printed resin materials are not associated with potential BPA-related risks in children.

Efficient recovery of bisphenol A from aqueous solution using K2CO3 activated carbon derived from starch-based polyurethane.

Endocrine-disrupting compounds (EDCs) are increasingly polluting water, making it of practical value to develop novel desirable adsorbents for removing these pollutants from wastewater. Here, a simple cross-linking strategy combined with gentle chemical activation was demonstrated to prepare starch polyurethane-activated carbon (STPU-AC) for adsorbing BPA in water. The adsorbents were characterized by various techniques such as FTIR, XPS, Raman, BET, SEM, and zeta potential, and their adsorption properties were investigated comprehensively. Results show that STPU-AC possesses a large surface area (1862.55 m2·g-1) and an abundance of functional groups, which exhibited superior adsorption capacity for BPA (543.4 mg·g-1) and favorable regenerative abilities. The adsorption of BPA by STPU-AC follows a pseudo-second-order kinetic model and a Freundlich isotherm model. The effect of aqueous solution chemistry (pH and ionic strength) and the presence of other contaminants (phenol, heavy metals, and dyes) on BPA adsorption was also analyzed. Moreover, theoretical studies further demonstrate that hydroxyl oxygen and pyrrole nitrogen are the primary adsorption sites. We found that the efficient recovery of BPA was associated with pore filling, hydrogen-bonding interaction, hydrophobic effects, and π-π stacking. These findings demonstrate the promising practical application of STPU-AC and provide a basis for the rational design of starch-derived porous carbon.

Comparison of effects of multiple oxidants with an ultrasonic system under unified system conditions for bisphenol A degradation.

Bisphenol A (BPA) as a trace contaminant has been reported, due to widespread use in the plastics industry. This study applied the 35 kHz ultrasound (US) to activate four different common oxidants (H2O2, HSO5-, S2O82-, and IO4-) for BPA degradation. With increasing initial concentration of oxidants, the degradation rate of BPA increased. The synergy index confirmed that a synergistic relationship between US and oxidants. This study also examined the impact of pH and temperature. The results showed that the kinetic constants of US, US-H2O2, US-HSO5- and US-IO4-decreased when the pH increased from 6 to 11. The optimal pH for US-S2O82- was 8. Notably, increasing temperature decreased the performance of US, US-H2O2, and US-IO4- systems, while it could increase the degradation of BPA in US-S2O82- and US-HSO5-. The activation energy for BPA decomposition using the US-IO4- system was the lowest, at 0.453nullkJnullmol-1, and the synergy index was the highest at 2.22. Additionally, the ΔG# value was found to be 2.11 + 0.29T when the temperature ranged from 25 °C to 45 °C. The main oxidation contribution is achieved by hydroxyl radicals in scavenger test. The mechanism of activation of US-oxidant is heat and electron transfer. In the case of the US-IO4- system, the economic analysis yielded 271 kwh m-3, which was approximately 2.4 times lower than that of the US process.

In vivo and in silico assessments of estrogenic potencies of bisphenol A and its analogs in zebrafish (Danio rerio): Validity of in silico approaches to predict in vivo effects.

This study assessed the estrogen-like potencies of bisphenol A (BPA) and its analogs (BPs) using in vivo and in silico approaches in zebrafish. Zebrafish embryos were exposed to 16 BPs, most of which concentration-dependently induced cytochrome P450 19A1b (CYP19A1b) expression. BPs-induced CYP19A1b expression was suppressed by fulvestrant, a nonselective high affinity antagonist for estrogen receptor (Esr) subtypes. For BPs that concentration-dependently induced CYP19A1b expression, we estimated their 50 % effective concentration (EC50) and relative potencies (REPs) with respect to the potency of BPA for inducing CYP19A1b expression. BP C2, Bis-MP, and BPAF showed lower EC50 than BPA, BPE, and BPF, while BPZ and BPB showed moderate EC50. The REP order of the BPs was BP C2 (26) > Bis-MP (24) > BPAF (21) > BPZ (5.8) > BPB (2.7) > BPE (1.5) > BPF (0.63) > 2,4'-BPF (0.22), indicating that some BPs showed greater estrogenic potencies than BPA in our system. We also constructed in silico homology models of ligand binding domains for zebrafish Esr subtypes, including Esr1, Esr2a, and Esr2b. Molecular docking simulations of ligands with the Esr subtypes revealed the interaction energies of some BPs were lower than that of BPA. The interaction energies showed significant positive correlations with their EC50 values for inducing CYP19A1b expression in vivo. This study showed that some BPA analogs have greater estrogenic potencies than BPA and that in silico simulations of interactions between ligands and Esr subtypes may help predict in vivo estrogenic potencies of untested chemicals.

Preparation of carbon self-doped g-C3N4 for efficient degradation of bisphenol A under visible light irradiation.

In this study, visible-light-driven carbon self-doped graphitic carbon nitride photocatalyst was fabricated by a facile method with urea and ammonium citrate, and used for photodegradation of bisphenol A (BPA) in the aqueous environment. The experiments indicated that the prepared photocatalyst (C0.02CN) showed high catalytic activity, and 96.0%, 93.2%, and 95.5% BPA could be photodegraded in 150 min under pH 3, 6, and 11, respectively. The photocatalytic degradation rate (0.018 min-1) and mineralization (27.6%) of C0.02CN for BPA were about 6.7 and 3.5 times higher than those of the g-C3N4 (0.0027 min-1, 7.87%), respectively. C0.02CN had high reusability with a photodegradation efficiency of 84.5% for BPA after 3 cycles. Moreover, C0.02CN introduced additional carbon atoms, which generated C-O-C bonds in the g-C3N4 lattice. In contrast to g-C3N4, carbon doping enhanced the visible light absorption range of C0.02CN, reduced its band gap, and improved the separation efficiency of photogenerated electron-hole pairs. Radical quenching experiment and ESR results revealed that superoxide radicals (•O2-) and photogenerated holes (h+) acted as important parts in the high photodegradation activity under visible light irradiation. This work puts forward a one-pot strategy for the preparation of carbon self-doped g-C3N4, displacing the high-energy consuming and complicated preparation technology with promising industrial applications.

Combined Toxic Effects of BPA and Its Two Analogues BPAP and BPC in a 3D HepG2 Cell Model.

Bisphenol A (BPA) is one of the most commonly used substances in the manufacture of various everyday products. Growing concerns about its hazardous properties, including endocrine disruption and genotoxicity, have led to its gradual replacement by presumably safer analogues in manufacturing plastics. The widespread use of BPA and, more recently, its analogues has increased their residues in the environment. However, our knowledge of their toxicological profiles is limited and their combined effects are unknown. In the present study, we investigated the toxic effects caused by single bisphenols and by the combined exposure of BPA and its two analogues, BPAP and BPC, after short (24-h) and prolonged (96-h) exposure in HepG2 spheroids. The results showed that BPA did not reduce cell viability in HepG2 spheroids after 24-h exposure. In contrast, BPAP and BPC affected cell viability in HepG2 spheroids. Both binary mixtures (BPA/BPAP and BPA/BPC) decreased cell viability in a dose-dependent manner, but the significant difference was only observed for the combination of BPA/BPC (both at 40 µM). After 96-h exposure, none of the BPs studied affected cell viability in HepG2 spheroids. Only the combination of BPA/BPAP decreased cell viability in a dose-dependent manner that was significant for the combination of 4 µM BPA and 4 µM BPAP. None of the BPs and their binary mixtures studied affected the surface area and growth of spheroids as measured by planimetry. In addition, all BPs and their binary mixtures studied triggered oxidative stress, as measured by the production of reactive oxygen species and malondialdehyde, at both exposure times. Overall, the results suggest that it is important to study the effects of BPs as single compounds. It is even more important to study the effects of combined exposures, as the combined effects may differ from those induced by single compounds.